Good quality ductile iron dismantling joint
- 品牌 runtaida
- 型號(hào)
Packaging & Delivery
| Packaging Details: | Ductile iron dismantling joint is packed by plastic film,then fixed into standard export wooden case |
|---|---|
| Delivery Detail: | 1.In stock: Immediately 2.Sample: 2 days 3.OEM/ODM: 3-15 Days |
Good quality ductile iron dismantling joint
Introduction of ductile iron dismantling joint :
Dismantling Joint are composed of a main body, sealing ring, gland, telescopic tube and other main components, applicable to flange connection, during the installation, adjust the length between flange and both ends of product, diagonal uniform tightening, gland bolt, make them as a whole, keep a certain displacement distance,during the installtion and maintenance, it'll be convenient for adjust size according to site . In the work , it can be anti-axial thrust transmission to the entire pipeline.
Usage and applicationof ductile iron dismantling joint :
Protecting piping and equipment system from stress or motion; It's suitable for conveying the steam which temperature not higher than 250 degrees and granular powder and other media such as sea water, fresh water, hot and cold water, drinking water, domestic sewage, crude oil, fuel oil, lubricating oil, refined oil, air, gas etc.
Material of ductile iron dismantling joint
No.
Name
Quantity
Material
1
Cover
2
QT400-15, Q235A, ZG230-450, 1Cr13,20
2
Sleeve
1
Q235A,20 , 16Mn, 1Cr18Ni9Ti
3
Gasket
2
NBR, CR, EPDM, NR
4
Bolt
n
Q235A, 35, 1Cr18Ni9Ti
5
Nut
n
Q235A, 20, 1Cr18Ni9Ti
| Main connecting dimension of ductile iron dismantling joint | ||||||
| Nominal diameter (DN) | External diameter | External dimension | N-tH. | |||
| Length | D | 0.25-1.6 Mpa | 2.5-6.4 Mpa | |||
| L1 | L | |||||
| 65 | 76 | 180 | 208 | 155 | 4-M12 | 4-M12 |
| 80 | 89 | 165 | ||||
| 100 | 108 | 195 | ||||
| 100 | 114 | 195 | ||||
| 125 | 133 | 225 | ||||
| 125 | 140 | 225 | 4-M16 | |||
| 150 | 159 | 220 | 255 | 4-M16 | 6-M16 | |
| 150 | 168 | 255 | ||||
| 200 | 219 | 310 | ||||
| 225 | 245 | 335 | ||||
| 250 | 273 | 223 | 375 | 6-M20 | 8-M20 | |
| 300 | 325 | 220 | 273 | 440 | 10-M20 | |
| 350 | 355 | 490 | 8-M20 | |||
| 350 | 377 | 490 | ||||
| 400 | 406 | 540 | ||||
| 400 | 426 | 540 | ||||
| 450 | 457 | 590 | 10-M20 | 12-M20 | ||
| 450 | 480 | 590 | ||||
| 500 | 508 | 645 | ||||
| 500 | 530 | 645 | ||||
| 600 | 610 | 750 | ||||
| 600 | 630 | 750 | ||||
| 700 | 720 | 855 | 12-M20 | 14-M20 | ||
| 800 | 820 | 290 | 355 | 970 | 12-M24 | 16-M24 |
| 900 | 920 | 1070 | 14-M24 | 18-M24 | ||
| 1000 | 1020 | 1170 | 14-M24 | 18-M24 | ||
| 1200 | 1220 | 1365 | 16-M24 | 20-M24 | ||
| 1400 | 1420 | 377 | 1590 | 18-M27 | 24-M27 | |
| 1500 | 1520 | 1690 | 18-M27 | 24-M27 | ||
| 1600 | 1620 | 1795 | 20-M27 | 28-M27 | ||
| 1800 | 1820 | 2000 | 22-M27 | 30-M30 | ||
| 2000 | 2020 | 2200 | 24-M27 | 32-M30 | ||
| 2200 | 2220 | 400 | 2420 | 26-M30 | ||
| 2400 | 2420 | 2635 | 28-M30 | |||
| 2600 | 2620 | 400 | 2835 | 30-M30 | ||
| 2800 | 2820 | 3040 | 32-M33 | |||
| 3000 | 3020 | 3240 | 34-M33 | |||
| 3200 | 3220 | 3440 | 36-M33 | |||
| 3400 | 3420 | 490 | 3640 | 38-M33 | ||
| 3600 | 3620 | 3860 | 40-M33 | |||
| 3800 | 3820 | 500 | 4080 | 40-M36 | ||
| 4000 | 4020 | 4300 | 42-M36 | |||
We are specialized in the production of dismantling joint , suitable for pressure level 0.25-6.4Mpa pipeline. Common models range from DN50 to DN3200, joints in GB standard are available, the spot can be shipped on the same day, uncommon models can be customized to 3-5 days delivery.
